What is Wipe New
Wipe New is a car restorer spray that claims to restore the showroom shine of your car. It claims to be long lasting for years. The infomercial asserts that Wipe New restores dull foggy headlights, faded bumpers, whethered sun-damaged vehicles to their original showroom shine. You will realize in this Wipe New review if these promises are true.
Why do you need Wipe New?
Are you uncompromisingly particular about your car and want it to look well turned-out at all times even though it’s really difficult to manage it? When the initial phase of the good looks and wonderful shape of your new car passes, it tends to appear dim and you feel disheartened to notice the weathered body, faded bumpers, foggy headlights and other things you wish never existed. Getting rid of such hassles is no easy job; it demands a whole lot of time, resources and of course, money. For all this you need the Wipe New. You will find out yourself in this Wipe New reviews below if it really stands up to these claims.. If you’re really concerned about these issues and frantically searching for a perfect solution to keep such embarrassing developments at bay, turn to Wipe New, the amazing new nano-polymer formula.
How does Wipe New claim to Work?
Wipe New claims to really smarten up your car to make it appear brand new and dismiss the undesirable elements that disfigure it as it’s built using the infinitely powerful nano technology that’s taking the world by storm.
Wipe New claims to be a great solution that liberates you of the burden of expensive car treatments such as applying and subsequently reapplying costly silicone based products. According to the Wipe New infomercial, normal car cosmetic results are only temporary and end up in wastage of your money and precious time, and can’t fight the impact that the rain, UV rays, salt and other agents can leave. But Wipe New claims to penetrate deep down and grips the surface tight to restore the luster that the car originally wore.
Retrieve the lost sheen permanently that strike your car and conquer the faded, weathered surfaces that tarnish your precious car and that too in an incredible 13.5 seconds flat with just one application and nothing else after that! Every inch coated with Wipe New restorer is permanently protected with a shine that actually lasts as long as you own the vehicle. Wipe New begs to give it a chance to rev up every part from bumpers, dashboards, rims and lots of more of your car! Wipe New is fast and really easy to use; switch over to it to acquire the enviable showroom new look permanently so easily that you’ll be zapped!
Wipe New claims to work better than other car cosmetic products because it works at the root of the problem and holds on to the surface tight. Thus it will not only restore your drive’s look it will also help maintain it by fighting the effects of salt, UV rays and rain for that matter.
One application of Wipe New is all it takes to have your car looking at its glorious best. Who needs those expensive silicone based products that require a few applications to do the job when this amazing product will do it in one go and work brilliantly all over, from bumpers to dashboards.
Wipe New FAQs
How much Wipe New do I need for my vehicle?
A single wipe across the vehicle’s surface (1.5 ounces) is enough for a mid-sized vehicle that is not awfully faded or porous.
What items does the Wipe New Pro Detailing kit include?
One red and two yellow microfiber applicator cloths, one pair of gloves, headlight prep pad, and sponge swab applicator each.
What is the purpose of gloves, headlight prep pad and applicator brush?
Wear the gloves to prevent irritation and because Wipe New doesn’t come off the skin easily if it dries. Use the headlight prep pad to remove heavy oxidation from the lens before you apply Wipe New. Dip the sponge tip of the brush into the Wipe New bottle and clean difficult areas – around your headlights, rear view mirror, grill inserts, interior HVAC vents, etc.
How are the microfiber cloths different from one another?
The two yellow cloths fit inside your palm for more precise application. Use the larger red cloth to apply Wipe New on surfaces like the headlights.
Can one stop applying Wipe New, restart later and get matching results?
Restarting may not always give same results because of difference in light, temperature, humidity, etc. It is recommended to finish the application on a surface in a single go. If you must, reapply in a less noticeable spot on the surface.
Will rain affect the application?
Wipe New needs 24 hours to cure. The vehicle must not be exposed to moisture – rain, dew, sprinklers, mist, or car washes as it may result in spotting or streaking.
Does Wipe New damage clothes?
Wipe New does not contain dyes but it hardens on drying therefore may damage your clothing.
Can one apply Wipe New on surfaces like glass/mirror?
It is not recommended on glass/mirrored surfaces as it may give a “wavy” effect. If you apply it on such a surface wipe it off immediately. Glass or mirrored surfaces are not included in the Wipe New Protection Guarantee.
Can one apply Wipe New on painted surfaces?
Only by a professional detailer in the right setting to prevent streaking. The vehicle owner can apply it to a painted surface at their own risk and it is not covered in Wipe New’s Protection Guarantee.
How can Wipe New be removed after drying or from a painted surface?
It can be removed with extremely fine high-grit (2000 or 3000) sandpaper. It comes off easily if wiped off immediately. Remove dried Wipe New from painted surface using a polishing compound on a microfiber cloth.
How long does Wipe New last after application?
Assuredly for two years on most surfaces. Reapplication is needed over a period of time if the surface is exposed to friction, oil from the skin, etc.
Why do streaks show on the surface?
Usually if Wipe New starts drying on the applicator cloth, if the surface has not been cleaned with soap and water or exposed to moisture within 24 hours.
Can Wipe New be applied to a fiberglass surface?
Yes. Shine will be restored to the surface and it will be protected from UV damage.
Is there any product to clean oxidation before applying Wipe New?
No. Do a regular prep and clean job on your fiberglass vehicles and ensure there is no residue by wiping your hand across it.
Wipe New Instructions
Wipe New should be applied on a well-ventilated area after wearing Nitrile gloves that you get with Pro Detail Kit. While this product shouldn’t be used on glass, extensive preparation is needed in case you want to use it on clear coated and painted surfaces on vehicles. That’s the reason an automotive detail professional is best equipped to do the job.
The exterior trim of a mid-size sedan can be coated with the help of 1 to 1.5 oz of the product. Application is best done from top of the car to down and that will make sure that freshly painted surfaces are not touched when wet. Before making any contact with a treated surface Wipe New should be left to dry for an hour. You can allow contact to moisture only after 24 hours of application. The product should not be applied in direct Sunlight.
If the product comes in contact with paint or other surfaces, you can wipe it off with cloth immediately. You can use Acetone to remove the product within the first hour of application. Once the product is cured you can remove it with a fine polishing compound or automotive sandpaper with high grit.
There can be some streaking if the product begins to cure on the cloth. In that case the cloth can be re-wet with the product or you can use a new cloth instead. Wipe New should always be stored in a cool place and discarded after expiration.
You can find demonstrations for use of product on http://www.facebook.com/WipeNew or http://www.youtube.com/user/AventoCorporation.
Instructions for Trim application
The surface should be washed with liquid detergent or car wash, while the surface should be rinsed and allowed to dry thoroughly.
Tip: There should be no water on and around the surface, and you can tap the surface gently. Any remaining water can be made to run and excess water can be dried up. Degreaser can be used on the surface to get best results and you can scrub thoroughly to get rid of any residue that might be left behind from other restorative products used in the past.
With the cap in place shake the bottle for 10 seconds before use. Pour the product on the yellow applicator cloth till it’s saturated. Apply on the surface without overlapping from one row to another. You might need a 2nd coat for badly faded surfaces; first coat should be dried for 10 minutes.
Tip: After saturation applicator cloth should be folded in half and then quarter.
Wipe New Headlight application instructions
Green/blue headlight polishing block found in the kit should be used. Untreated lens should be treated with the abrasive side to rid it of contaminants and oxidation. Rub in back and forth motions to ensure that surface has a white hazy appearance.
When the lens has yellow tint rub till yellow is removed. Rinse it till all dust is removed and let the surface dry before using the product.
Shake bottle with cap on for 10 seconds before opening, pour on applicator cloth till saturated and apply on the surface in a single wipe without any overlap for best results.
What do I get?
Don’t miss out on the irresistible offer on Wipe New that brings you one bottle for just $19.99, plus $7.99 S&P, and also the Detail Kit along with application pads, special headlight pad, detailing brush, two pairs of applicator gloves and a polishing block free! Not only that, the entire offer will also be doubled on payment of just$7.99 separate S&P! Official website GetWipeNew.com / WipeNew.com